hth® 6-way test strips

  • Perform up to 50 tests
  • Tests for free available chlorine, bromine, total chlorine, pH, alkalinity, total hardness, cyanuric acid
  • Compatible with salt water systems           
  • Application: direct to pool     

Application Instructions: See package directions for testing free chlorine, total chlorine, bromine, pH, total alkalinity, total hardness and cyanuric acid.    

REVIEWS



Quickly & Easily Test Pool Water


hand holding test strip over container

Test Your Water

How often you should test and balance your pool water can vary based on how often you use it and a number of other variables; but it’s important to remember that for chlorine and pH, you should usually test your pool 2-3 times/week. That may sound like a lot, but water balance is vital for your pool’s health & the health of the people who swim in it.

woman clipping bag of shock image

Shock Weekly

In ideal circumstances, shocking your pool just once a week will keep it looking clean and clear; but any heavy rainfall, signs of algae, use by lots of swimmers, or periods of very sunny weather can deplete free chlorine levels, which means an extra dose of hth® Shock is needed. Sundown is the optimum time to shock your pool because the chlorine can work without fighting the sun's ultraviolet rays and has more time to restore water clarity. 

app thumbnail

hth® Test to Swim App

The hth® Test to Swim™ water testing app is essential to spending more time splashing and less time guessing!

Features: 
-Easily input your water results
-See immediate analysis & step-by-step treatment recommendations and dosing instructions for balancing your pool 
-Build pool profile with pool size calculator 
-How-to videos on everything from basic pool maintenance to specific pool problems


How to use hth® 6-way test strips


eighteen inch text graphic image

1. Dip Test Strip Into Water

Dip the test strip into the pool water 18 inches below the surface of the water (approximately deep enough so the water reaches your elbow).

round clock graphic image

2. Wait 20 Seconds

Remove with pads facing up. Do not shake off excess water. Hold strip level for 20 seconds.

test strips graphic image

3. Check your results

Find out what you need for crystal clear pool water with the hth® Text to Swim™ app or by comparing your test strip to the back of the canister.


WEATHER


Today

Tomorrow

Day After