hth® pH up pods, 1.82kg

  • Raises pH levels
  • Prevents corrosion of metal and plaster surfaces
  • Prevents eye and skin irritation from pool water
  • Compatible with salt water systems
BUY NOW

Balancing your pool water is even easier with the NEW! hth® Pre-measured Water Soluble Pods.  These easy-to-use pods make dosing simple and quick. To keep your pool water comfortable for bathers and to protect pool surfaces and equipment from damage, the pH of pool water should be maintained between 7.2 and 7.8.  Help reduce pH drift and erratic changes when adjusting the pH by testing the total alkalinity each week and maintaining it between 60 and 120ppm.

Application Instructions:
Test the pH each time sanitizer is added using a reliable test kit.

Skimmer Application - Be sure that the skimmer does not contain any chemical residue or debris.  Add 1 pod directly into the pool skimmer while the pump is running.  Allow the pod to dissolve before adding additional pods or other pool products.  Only add 1 pod at a time.
Pool Application - Add appropriate number of pods to the deep end of the pool with the circulation system on.  Disperse any undissolved chemical from the bottom of the pool with a pool brush until the chemical is completely dissolved.  If multiple pods are added at one time, they should be distributed around the deep end and should not be concentrated in one place. Add the appropriate number of pods, as designated in the table below, to raise and maintain the pH between 7.2 and 7.8.


REVIEWS



Testing and Balancing


swimming pool water test strip canister line image

Test Your Water

How often you should test and balance your pool water  can vary based on how often you use it and a number of other variables; but it’s important to remember that for chlorine and pH, you should usually test your pool two to three times a week. That may sound like a lot, but water balance is vital for your pool’s health and the health of the people who swim in it. When your pool water is out of balance, your sanitizers can be less effective, the water can cause irritation to the skin and eyes.  And if the water gets imbalanced enough, it can even damage the pool’s surfaces, structure, or equipment.

granule pool water chemical packet line graphic

Shock Weekly

In ideal circumstances, shocking your pool just once a week will keep it looking clean and clear; but any heavy rainfall, signs of algae, use by lots of swimmers, or periods of very sunny weather can deplete free chlorine levels, which means an extra dose of hth® Shock is needed. Sundown is the optimum time to shock your pool because the chlorine can work without fighting the sun's ultraviolet rays and has more time to restore water clarity. 

test strips graphic image

hth® Test to Swim™ App

The hth® Test to Swim™ water testing app is essential to spending more time splashing and less time guessing!

Features: 
-Easily input your water results
-See immediate analysis & step-by-step treatment recommendations and dosing instructions for balancing your pool 
-Build pool profile with pool size calculator 
-How-to videos on everything from basic pool maintenance to specific pool problems


WEATHER


Today

Tomorrow

Day After