Balancing your pool water is even easier with the NEW! hth® Pre-measured Water Soluble Pods. These easy-to-use pods make dosing simple and quick. To keep your pool water comfortable for bathers and to protect pool surfaces and equipment from damage, the pH of pool water should be maintained between 7.2 and 7.8. Help reduce pH drift and erratic changes when adjusting the pH by testing the total alkalinity each week and maintaining it between 60 and 120ppm.
For Best Results: Keep the total alkalinity at 60-120 parts per million (ppm).
1. Use a reliable test kit to measure the total alkalinity concentration of your pool water.
2. Be sure that the skimmer is empty and does not contain any chemical residue or debris.
3. If the alkalinity is below 60 parts per million (ppm), add the amount of product as directed on the chart below.
Skimmer Application – Add 1 pod directly into the pool skimmer while the pump is running. Allow the pod to dissolve before adding additional pods or other pool products. Only add 1 pod at a time.
Pool Application – Add appropriate number of pods to the deep end of the pool with the circulation system on. Disperse any undissolved chemical from the bottom of the pool with a pool brush until the chemical is completely dissolved. If multiple pods are added at one time, they should be distributed around the deep end and should not be concentrated in one place. Use the chart to determine the correct amount of this product to use.